- Articles Of Iron Or Steel
- Tubes, Pipes And Hollow Profiles, Seamless, Of Iron (other Than Cast Iron) Or Steel.
- Tubes, Pipes And Hollow Profiles, Seamless, Of Circular Cross-section, Of Stainless Steel, Cold-drawn Or Cold-rolled "cold-reduced" (excl. Line Pipe Of A Kind Used For Oil Or Gas Pipelines, Casing And Tubing Of A Kind Used For Drilling For Oil Or Gas)
ASTM A213 alloy tube
Product Images
Product Property
| Product Status : | New |
| Sample Available : | no |
| Shipment Terms : | fob,cfr,cif,Negotiable |
| Payment Mode : |
T/T,L/C |
Description
ASTM A213 Standard covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes.
Our products for ASTM A213 alloy steel tubes have been listed as follows:
- ASTM A213 T91ASTM A213 T22ASTM A213 T12ASTM A213 T11ASTM A213 T9ASTM A213 T5
Grades containing the letter H in their designation have requirements different from those of similar grades not containing the letter H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements. The tubes shall be made by the seamless process and shall be either hot finished or cold finished, as specified. Grade TP347HFG shall be cold finished. Heat treatment shall be done separately and in addition to heating for hot forming. The ferritic alloy and ferritic stainless steels shall be reheated. On the other hand, austenitic stainless steel tubes shall be furnished in the heat-treated condition. Alternatively, immediately after hot forming, while the temperature of the tubes is not less than the minimum solution temperature, tubes may be individually quenched in water or rapidly cooled by other means. Tension test, hardness test, flattening test, and flaring test shall be done to each tube. Also, each tube shall be subjected to the nondestructive electric test or hydrostatic test.
