Specification: PF2A2-141J

Color: Black

Unit price: USD920.00/TON FOB NINGBO

Specification: PF2A2-161J

Color: Black

Unit price: USD940.00/TON FOB NINGBO

Specification: PF2A2-161J

Color: Brown

Unit Price: USD1, 280.00/TON FOB NINGBO

Specification see below:

Phenolic Moulding Compound

Characteristic and Application PF2A2-141J

The product is manufactured based on the phenolic or modified resin, add up the wood power and add up material to successfully make the thermal setting plastic material, improved the electric features, it is suitable for the moulding process to make the the low-voltage electric’s insulation structure.

Technological property

Properties Indexes

Volumetric Coefficient ≤ 3.0

Fluidity mm 80-140

Relative density ≤ 1.45

Properties Mpa ≥ 70

Flexural strength with gap KJ/m2 ≥ 1.5

Flexural strength without gap KJ/m2 ≥ 6.0

Hot distortion Temperature ℃ ≥ 140

Water absorbency mg ≤ 50

Insulation resistance Ω ≥ 108

Dissipation factor (1MHz)tanδ≤ 0.10

Dielectric strength(90℃) MV/m ≥ 3.5

Notes:1. Each index shall be the test result of molding plastic test sample.

2. The fluidity testing method and the index shall decide by buyer and seller. If no special requested, use the Raschig method. The indexes in the table are only for reference. The molding pressure for compression is 30, and for injection plastic is 7.5.

3. Choose impact intensity gap and no-gap alternatively, prior to the impact intensity of gap sample.

4. The shrinkage index shall decide by buyer and seller, the indexes in the table are for reference.

Moulding reference condition

Regimentation	Warm-up condition	Moulding condition	Remarks
Temperature	Time	Temperature	Pressure	Time
A4	105+3	15	165-175	30-40	20-60	1.The non-electrical test sample, no pre heating is allowed , can use deflation. 2. The grain diameter of molding compound is larger than 3mm, the pressure can be added properly.

Package and storage

The products should be packed in moisture-proof liner bags to keep dry; the net weight of product is 25kgs.

The products should be stored in cool and dry warehouse. They should be kept away form fire, warm air and sunlight. The product’s storage life is one year. If the products are out of the storage limit, the another tests should be done, and then the qualified product still can be used.

Phenolic Moulding Compound

Characteristic and Application PF2A2-161J

The product is manufactured based on the phenolic or modified resin, add up the wood power and add up material to successfully make the thermal setting plastic material, improved the electric features, it is suitable for the injection process to make the low voltage electric's insulation structure which has used in hot and wet heat area.

Technological property

Properties Indexes

Volumetric Coefficient ≤ 3.0

Fluidity mm negotiated

Relative density ≤ 1.45

Properties Mpa ≥ 70

Flexural strength with gap KJ/m2 ≥ 1.5

Flexural strength without gap KJ/m2 ≥ 6.0

Hot distortion Temperature ℃ ≥ 140

Water absorbency mg ≤ 40

Insulation resistance Ω ≥ 109

Dissipation factor (1MHz)tanδ≤ 0.10

Dielectric strength(90℃) MV/m ≥ 3.8

Shrinkage % 0.4-1.0

Notes:1. Each index shall be the test result of molding plastic test sample.

2. The fluidity testing method and the index shall decide by buyer and seller. If no special requested, use the Raschig method. The indexes in the table are only for reference. The molding pressure for compression is 30±2Mpa , and for injection plastic is 7.5±0.5Mpa.

3. Choose impact intensity gap and no-gap alternatively, prior to the impact intensity of gap sample.

4. The shrinkage index shall decide by buyer and seller, the indexes in the table are for reference.

Moulding reference condition

Regimentation	Warm-up condition	Moulding condition	Remarks
Temperature	Time	Temperature	Pressure	Time
A4	105+3	15	160±3	30-40	1-2	1.The non-electrical test sample, no pre heating is allowed , can use deflation. 2. The grain diameter of molding compound is larger than 3mm, the pressure can be added properly.

Package and storage

The products should be packed in moisture-proof liner bags to keep dry; the net weight of product is 25kgs.

The products should be stored in cool and dry warehouse. They should be kept away form fire, warm air and sunlight. The product’s storage life is one year. If the products are out of the storage limit, the another tests should be done, and then the qualified product still can be used.