Bale Net Wrap is a netting material made from polyethylene yarn by raschel loom machine. It has the same knitting pattern with pallet net wrap and the only difference is on the weight. The pallet net wrap is normally around 4g/m, while the bale net wrap should be over 6g/m.

Over the years bale netting has become an attractive alternative to twine for the wrapping of round hay bales. The bale net wrap has the following advantages when compared to twine:

Reduced Time to Wrap
Only 2 -3 revolutions to wrap, means more bales per hour, less wear and tear on equipment, plus a savings in fuel.

Smooth Lay-Flat Bale Surface

The open mesh wrap will force the stalks down against the bale surface, resulting in a more weather resistant bale. Without twine "valleys" to collect rain, water penetration and spoilage is reduced by up to 50%. This reduction in spoil will more than pay for the cost of the netting.

Ideal for Silage Bales
The smooth netting surface saves on the use of stretch film. When ready to feed, film and netting are removed together, as one unit.

Easy Removal
The netting is easy to cut and remove, with no fear of lost ends and also offers reduced bulk in disposal.　

End of Roll Marking
We can produce an "End of Roll Marking", a coloured warning stripe in the center of the wrapped bale. This is a convenient warning to tell you the roll needs replacement.