- Plastics And Articles Thereof
- Other Plates, Sheets, Film, Foil And Strip, Of Plastics, Non-cellular And Not Reinforced, Laminated, Supported Or Similarly Combined With Other Materials.
- Plates, Sheets, Film, Foil And Strip, Of Non-cellular Polymers Of Vinyl Chloride, Containing By Weight >= 6% Of Plasticisers, Not Reinforced, Laminated, Supported Or Similarly Combined With Other Materials, Without Backing, Unworked Or Merely Surface-worked Or Merely Cut Into Squares Or Rectangles (excl. Self-adhesive Products, And Floor, Wall And Ceiling Coverings Of Heading 3918)
Black-white Projection Screen Film
Product Images
Product Property
| Product Status : | New |
| Sample Available : | yes |
| Shipment Terms : | fob,cfr,cif,Negotiable |
| Payment Mode : |
T/T,L/C,cash,PayPal,WesternUnion,Negotiable |
Description
| Product Name：Black-white Projection Screen Film | |||
| Product Item No. | KW001 | ||
| Fire Resistant | YES | Mildew Proof | YES |
| Cleanable | YES | Anti-static | YES |
| Viewing Angle | 100°(L&R50°) | Gain | 1.1 |
| Suitable temperature | -20° ~ +60° | Product structure | Black PVC film+White PVC film |
| Available width | 2.2m/2.8m/3.2m | Thickness | 0.32mm±0.02mm |
| General Recommendations: ● Cleaning with soapy water is sufficient . Do not use powder or abrasive paste. We advise that you test any cleaning agent on a small area first . ● Radio Frequency welding : Optimization needed depending on machine . When welding the joins , should be made using the same side of the roll(right to right and left to left .) ● Digital printing and spray coating with solvent inks : Depends upon the type of machine and the nature of the ink . We always recommend preliminary testing prior to full production running . ● After unrolling : For a good lay flat , cut panels should be allowed to relax for 24 hours and then should be trimmed square. ● Storage & Handling : We recommend indoor storage (no sunlight) at room temperature(max.23℃), storage time less than six months after production date.Film should be stored at room temperature (max.23℃, min.24h ) before processing. | |||
| Comments:Other colors, thickness, or embosses , can be developed on demand. |
