The machine can make the brickforce for construction. The finished brickforce is in rolls and the machine can output three brickforce rolls at the same time. It is easy to operate and maintain. The brickforce is used in the brickwork reinforcement. It can be black brickforce or galvanized brickforce.
The application of the brickforce:
Brick Force masonry reinforcement is specified into projects by consulting engineers for it's cost and time saving properties.

Brick Force consists of two parallel wires joined by cross wires. The flattened profile of the main wires allows for efficient lapping and ensures sufficient mortar cover to develop bond.

Brick Force is available in both galvanised and stainless steel material.

Wire diameter:1.6-3.0mm
Line wire spacing: 75mm, 115mm, 230mm
No. of line wire: 6
Cross wire spacing: 300mm
Mesh width: 1000mm
Mesh roll length: 25m
Line wire feeding from coil
Cross wire feeding from pre-straighten & cut wire
Welding speed: 20 rows of cross wires/minute
Mesh output form: It can output 3 finished mesh roll at the same time