7M Preparation-Painting and Drying production line of specification :

1.Booth Dimensions
- Internal Size(L*B*H) Preparation :7000*4000*2800mm
Painting booth:7000*4000*2800mm
Drying booth :7000*4000*2800mm
- External Size(L*B*H) 7120*15500*3460mm
2.Foundation and Floor
- Loading Capacity of Galvanized Grating 650KG/ wheel,
- Surface Area 27M*2 Full Galvanized Grating gills*3unit
- Metal Basement 800mm Height should be need to dig
foundation
- Drive-in Ramps NO
Wall and Door
- Steel Wall and Roof Panel Double Construction with Insulations EPS 60mm
- Thickness with Insulations EPS 50mm
5-Folded Entrance Door With Safety Glass Window 3200*2700 mm (B*H) -2unit
-Operators Door With Safety , Glass Window 800*2000 mm (B*H) 2PCS
Lighting
- Side Lightings Preparation 24 Units, each 4*58W, Total 1392W
Painting booth 32 Units, each 4*(58W, Total 1856W
Drying booth 4 Units, each 2*58W, Total 464w
- Brightness
Preparation >800 Lux, IP54 Grade
Painting booth >1000 Lux, IP54 Grade
Drying booth >300 Lux, IP54 Grade
3.Filtration
- Prefilters Fiberglass, Paint-Stop-Filters Plate type duel filters
- Ceiling Filters EU5 Fine Filters, 6 Units
- Floor Filters Fiberglass, Paint-Stop-Filters
Ventilation System 1 Unit Preparation
- Direct Drive Motor (Fresh Air)
1*5.5KW, 970RPM, 380V, 50HZ motor certificationCE
- Direct Drive Motor (Exhaust Air) NO
- Fan Capacity 18000m*3/h
- Air Flow Speed +/- 0.15m/s
4.Ventilation System 1Unti Painting booth
-Direct Drive Motor (Fresh Air)2*7.5KW, 970RPM, 380V, 50HZ motor certificationCE
- Direct Drive Motor (Exhaust Air) 2*7.5KW, 970RPM, 380V, 50HZ Domestic motor certificationCE
- Fan Capacity 25000m*3/h
- Air Flow Speed +/- 0.28m/s in an empty booth
Ventilation System 1 Unit Drying booth
- Direct Drive Motor (Fresh Air):1*7.5KW, 970RPM, 380V, 50HZ motor certificationCE
- Direct Drive Motor (Exhaust Air) NO
- Fan Capacity 25000m*3/h
- Air Flow Speed +/- 0.28m/s in an empty booth
6.Heating System : 1Unit Painting booth
- Heating Exchanger Stainless Steel 1Gr18Ni9Ti
-Heating Exchange Capacity 2*200KW(260.000cal/H) RIELLO
- Max. Drying Temperature 80 degree
- Heating time:3-5 min (from 20 to 60 degree) by Drying Phase
7.Heating System:1Unit Drying booth
- Heating Exchanger: Stainless Steel 1Gr18Ni9Ti
-Heating Exchange Capacity 2*200KW(260.000cal/H) RIELLO
- Max. Drying Temperature 80 degree
- Heating time:3-5 min (from 20 to 60 degree) by Drying Phase
- Heating Type :Diesel
8.Control Board
-Control system: Stander control Delta Depressurization start system EN60204-1-2006
- Function:Spraying , baking, warming spray paint, emergency
stop switch
-PLC :yes
-Import element master device import element
- Overpressure Manometer :yes
- Alarm equipment :yes