Work Flow
De-coiler—feeding—leveling ---lunching holes --roll forming----cutting the panel---- table supporter






Plate Diagram( Profile Drawing)
Thickness of the coil:2.0-3mm
Types: C80-C300.( include 9 difference sizes)
Main machine components
Simple decoiler
Feeding and guiding device
Leveling device
Punching holes device
Roll forming machine
Cutting device
PLC cabinet
Hydraulic station


Introduction of main equipment structure
De coiler: Simple one, max load is 3 T

Main frame:
Forming speed: no more than 12/min( adjustable)
Forming steps: 15 steps
Machine sheet: all adopt China standard 36# H-section steel after welding
Material of shaft: 45# steel
Diameter of shaft:75mm
Material of rollers: bearing steel
Main power:15KW
Driven style: by 1.5” chain
Hydraulic power :7.5KW
Cutting part( 9 pieces of cutting mould):
Cutting after forming, the length according your needs
Cutting operation: the machine will be stop automatic, then cutting, and keep working after cutting
Cutter material: Cr12, after heating treatment
The error of the length: +/- 2mm
Control system:
Automatic to calculate the length
Automatic to record the sheet number
Setting the length and the quantity, then automatic cutting the panel and it will stop when arrival your setting
Simple operation, automatic to change the rrror of the size.
Display the finish production quantity.
Electric pressure: 380V, 50 Hz, 3-phase