1. Laser beamcollimated technology

2. In order tokeep high stability, our control and monitoring module upgraded recently. Nowit has more than 10 monitoring and control signals, it can know whether thewater temperature high or low, and whether the water flow over or less, environment temperature high or low, laser power supply normal or abnormal, laser output normal or abnormal, etc.

3. An importantpoint, you know, water pump is a necessary part for an IPL, elight or Nd:yaglaser, etc. For the diode laser, it has special requirements for the water pump.The water flow should be at least 3.5L/minaround the diode laser bars(should reach 5L/minfor engineering needs), so our water pump is with enough consideration of thispoint.

3. We have strictageing test. The diode laser module needs to be with 76 hours continuoustesting(the energy density setting at maxinum 120J/cm2 at this time), then wecan assemble the handpiece. After that, the whole handpieces will be withseparate ageing test. At last, the whole machinen together with handpiece, willbe with 4-5 hours testing( energy density setting with 120J/cm2). Threedifferent separate testing stages can find any tiny problems before exitingfactory, and solid guarantee the stability working when clients receive themachine..

TechnicalSpecifications:

1. Wavelength	810nm
2. Pulse Width	25ms~950ms
3. Repetition Rate	1-20Hz
4. Energy Fluence	0~120J/cm2
5. Laser Window	10mmx16mm
6. Handle Piece Flow Rate	4.5~5.0L/min
7. LCD Screen	8.4” Touch LCD
8. Input VAC	220VAC / 50-60Hz(110VAC optional)
9. Laser Life time	10 Million shots(40J per shot)