Drywall Stud Roll Forming Machine components
1. Uncoiler and its base.
2. Coil sheet guiding and adjusting device.
3. Roll forming system.
4. Punching system (optional).
5. Hydraulic post cutting system
6. PLC control system.
7. Support table.
Main technical parameters for the drywall stud roll forming machine:
1. Suitable thickness of raw material: 0.3-0.8mm;
2. Forming speed: about 18-22m/min;
Mechanical expansion decoiler, main forming unit, hydraulic following mould cutter, hydraulic station, PLC control system, unloading rack, a separate offline punching machine. If you have interesting on Dry Wall Stud Roll Forming Machine, you can contact us. by clicking the "Inquire" button for further information on Dry Wall Stud Roll Forming Machine packing, unit price, payment, min order, transportation, material and more.

drywall stud roll forming machine：
Summary for the drywall stud roll forming machine:
* Material: Galvanized, Pre-Painted steel sheet
* Material Thickness: 1.0-3.0mm
* Main Power: 15KW
* Forming Speed: 10-15m/min
Main Parts for the drywall stud roll forming machine:
* Manual Decoiler
* Roll Forming System
* Hydraulic Cutting
* Hydraulic Station
* PLC Control System
* Run-out Table
Working Flowing of the drywall stud roll forming machine:
Decoiler--- Feeding---- Roll Forming ---- Cutting ---- Run out table
Technical Data of the drywall stud roll forming machine:
1). Decoiler
* Decoiler Type: Manual Decoiler
* Weight Capacity Of Decoiler: 3 Ton
* Manual expanding
* Inner Diameter. 460-520mm, drywall stud roll forming machine
* Outer Diameter. 1400mm
2). Roll Former
* Axis Diameter: 75mm
* Forming Roller stand: 16 Groups
* Main Axis material: First grade 45# steel, heated and quenched
* Roller material: GCr15 Steel, Quenched and heated process, drywall stud roll forming machine
* Drive Type: 1.5” Chain of transmission
* Chain material: 45#steel, HRC45-50
* Machine Frame stand: Welded structural steel
* Thickness of Fame Steel: 18mm
* Main Power: 15KW
3) Cutting Device for drywall stud roll forming machine:
* Cutting type: Hydraulic cutting
* Hydraulic pump station power: 5.5 KW
* Hydraulic pressure: 12Mpa
* Hydraulic Blade and cutter material: Cr12Mov, quenching process 58-62
* Cutting length tolerance: 10M+/- 2.0 mm
4). Electrical System for drywall stud roll forming machine:
* Voltage: 380V, 3 Phase 50Hz
* PLC Electrical control system: PANASONIC
* Length Controller: Encoder Frequency Control System, drywall stud roll forming machine
* Operation: Touch Screen
* Transducer: PANASONIC
5) Runout Table:
* Non-power type, drywall stud roll forming machine