Full Cold Shrinkage Cable Accessories Series
Product Property
| Product Status : | New |
| Sample Available : | yes |
| Shipment Terms : | fob,cfr,cif,Negotiable |
| Payment Mode : |
T/T,L/C |
Description
Full Cold Shrinkage Cable Accessories Series
Product Feature:
1.Reliable capability
It is made from imported-SiR (Silicon Rubber) with satisfying electric insulation, outstanding elasticity tracking resistance, corrosion resistance etc, as well as approved electric capability and long-term service-life. It can exert modest radial pressure upon the cable all the time to make the contact compact after installing.
Also it will expand or shrink simultaneously with the cable to avoid tip-and-run breakthrough caused by the working cable’s respiration. The stresscone and primary insulation are composite as one to ensure insulation reliable and performing safe by solving the problem of the stress concentration on the contour of the semiconductive layer.
2.Simple and convenient installation
By use of the special cold shrinkage technique invented by Histe Co., Ltd, one with no special training can fix it without the assistant of fire, electricity. The process is simple and labor-saving.
It is adequate for aloftwork, fieldwork and works in the combustible environment in particular, such as , coal mine, oilfield and under-well. Thus greatly reduces the quality accidents caused by improper operation.
3.Excellent chemical capability
Feculence-resistance, alkali resistance, ageing resistance , perfect hydrophobic performance, superior heat and cold resistance are included. The proper working temperature ranges from -70℃ to +120℃. Therefore this product can be specially used in high-altitude, cold, humid, saline and foggy regions as well as heavy polluted areas.
24kV Full cold shrinkable cable accessories technical data
Product name
test name
standard requirement
result
remarks
35kV indoor, outdoor termination and intermediate connectors
p.f withstand voltage test
105kV no flash and no breakdown
105kV no flash and no breakdown
passed
test of partial discharge
39kV when the discharge amount of ≤ 10pC
39kV under the combination of sample
Discharge amount for 4pC
passed
load circulation test
5h heated, 3h cooled, conductor
heated to 90~95℃
Conductor heated to 95 to 100 ℃
Each cycle is 8h, which add
Heat 5h cooling 3h, a total of three cycles
as follows
partial discharge test
39kV when the discharge amount of ≤ 10pC
39kV under the combination of sample
Discharge amount for 4pC
passed
Impulse voltage test
250kV, on negative and positive poles
applied each 10times, one flashover is
allowed but not calculated
250kV, on negative and positive poles
applied each 10times, one flashover is
allowed but not calculated.
passed
test of the negative pole
156kV, 15min no flash and no breakdown
156kV, 15min no flash and no breakdown
passed
Power voltage test
104kV, 4h no flash and no breakdown
104kV 4h no flash and no breakdown
passed
Table of specification of 24kV cold-shrinkable terminal cable accessories
Product Name Type
Suit for Cable Cross Section
(mm2 )
24kV 1 core cold shrink indoor termination NLSY -24/1.1 25-50
NLSY -24/1.2 70-120
NLSY -24/1.3 150-240
NLSY -24/1.4 300-400
NLSY -24/1.5 500-630
NLSY -24/1.6 800
NLSY -24/1.7 1000
24kV 3 cores cold shrink indoor termination NLSY -24/3.1 25-50
NLSY -24/3.2 70-120
NLSY -24/3.3 150-240
NLSY -24/3.4 300-400
NLSY -24/3.5 500-630
NLSY -24/3.6 800
NLSY -24/3.7 1000
24kV 1 core cold shrink outdoor termination WLSY-24/1·1 25-50
WLSY-24/1·2 70-120
WLSY-24/1·3 150-240
WLSY-24/1·4 300-400
WLSY -24/1.5 500-630
WLSY -24/1.6 800
WLSY -24/1.7 1000
24kV 3 core cold shrink outdoor termination WLSY-24/3·1 25-50
WLSY-24/3·2 70-120
WLSY-24/3·3 150-240
WLSY-24/3·4 300-400
WLSY -24/3.5 500-630
WLSY -24/3.6 800
WLSY -24/3.7 1000
24kV 1 core intermediate connector JLSY-24/1·1 25-50
JLSY-24/1·2 70-120
JLSY-24/1·3 150-240
JLSY-24/1·4 300-400
JLSY-24/1·5 500-800
24kV 3 core intermediate connector JLSY-24/3·1 25-50
JLSY-24/3·2 70-120
JLSY-24/3·3 150-240
JLSY-24/3·4 300-400
JLSY-24/3·5 500-800
Product Feature:
1.Reliable capability
It is made from imported-SiR (Silicon Rubber) with satisfying electric insulation, outstanding elasticity tracking resistance, corrosion resistance etc, as well as approved electric capability and long-term service-life. It can exert modest radial pressure upon the cable all the time to make the contact compact after installing.
Also it will expand or shrink simultaneously with the cable to avoid tip-and-run breakthrough caused by the working cable’s respiration. The stresscone and primary insulation are composite as one to ensure insulation reliable and performing safe by solving the problem of the stress concentration on the contour of the semiconductive layer.
2.Simple and convenient installation
By use of the special cold shrinkage technique invented by Histe Co., Ltd, one with no special training can fix it without the assistant of fire, electricity. The process is simple and labor-saving.
It is adequate for aloftwork, fieldwork and works in the combustible environment in particular, such as , coal mine, oilfield and under-well. Thus greatly reduces the quality accidents caused by improper operation.
3.Excellent chemical capability
Feculence-resistance, alkali resistance, ageing resistance , perfect hydrophobic performance, superior heat and cold resistance are included. The proper working temperature ranges from -70℃ to +120℃. Therefore this product can be specially used in high-altitude, cold, humid, saline and foggy regions as well as heavy polluted areas.
24kV Full cold shrinkable cable accessories technical data
Product name
test name
standard requirement
result
remarks
35kV indoor, outdoor termination and intermediate connectors
p.f withstand voltage test
105kV no flash and no breakdown
105kV no flash and no breakdown
passed
test of partial discharge
39kV when the discharge amount of ≤ 10pC
39kV under the combination of sample
Discharge amount for 4pC
passed
load circulation test
5h heated, 3h cooled, conductor
heated to 90~95℃
Conductor heated to 95 to 100 ℃
Each cycle is 8h, which add
Heat 5h cooling 3h, a total of three cycles
as follows
partial discharge test
39kV when the discharge amount of ≤ 10pC
39kV under the combination of sample
Discharge amount for 4pC
passed
Impulse voltage test
250kV, on negative and positive poles
applied each 10times, one flashover is
allowed but not calculated
250kV, on negative and positive poles
applied each 10times, one flashover is
allowed but not calculated.
passed
test of the negative pole
156kV, 15min no flash and no breakdown
156kV, 15min no flash and no breakdown
passed
Power voltage test
104kV, 4h no flash and no breakdown
104kV 4h no flash and no breakdown
passed
Table of specification of 24kV cold-shrinkable terminal cable accessories
Product Name Type
Suit for Cable Cross Section
(mm2 )
24kV 1 core cold shrink indoor termination NLSY -24/1.1 25-50
NLSY -24/1.2 70-120
NLSY -24/1.3 150-240
NLSY -24/1.4 300-400
NLSY -24/1.5 500-630
NLSY -24/1.6 800
NLSY -24/1.7 1000
24kV 3 cores cold shrink indoor termination NLSY -24/3.1 25-50
NLSY -24/3.2 70-120
NLSY -24/3.3 150-240
NLSY -24/3.4 300-400
NLSY -24/3.5 500-630
NLSY -24/3.6 800
NLSY -24/3.7 1000
24kV 1 core cold shrink outdoor termination WLSY-24/1·1 25-50
WLSY-24/1·2 70-120
WLSY-24/1·3 150-240
WLSY-24/1·4 300-400
WLSY -24/1.5 500-630
WLSY -24/1.6 800
WLSY -24/1.7 1000
24kV 3 core cold shrink outdoor termination WLSY-24/3·1 25-50
WLSY-24/3·2 70-120
WLSY-24/3·3 150-240
WLSY-24/3·4 300-400
WLSY -24/3.5 500-630
WLSY -24/3.6 800
WLSY -24/3.7 1000
24kV 1 core intermediate connector JLSY-24/1·1 25-50
JLSY-24/1·2 70-120
JLSY-24/1·3 150-240
JLSY-24/1·4 300-400
JLSY-24/1·5 500-800
24kV 3 core intermediate connector JLSY-24/3·1 25-50
JLSY-24/3·2 70-120
JLSY-24/3·3 150-240
JLSY-24/3·4 300-400
JLSY-24/3·5 500-800
