Cone crusher' advantages

1 High quality and reasonable price
2 Reliable operation, durable construction
3 Easy maintenances and long span life
Features of Cone Crusher:

Cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness, and cone crusher is of stable structure, high efficiency, easy adjustment, and economically etc. The spring system of crusher acts as an overloading protection system that allows metals t pass through the crushing chamber so as not to damage the cone crusher.

The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to make sure reliable performance. The type of crushing chamber depends upon the size of feeding and fineness of the crushed product. The standard type (PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.

Working principle of Cone Crusher:

Cone crusher crushes materials by the working surface between the movable cone and fixed cone. The movable cone of the cone crusher is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve. And the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear. And the wheel of the conveyor belt is driven by motor through-V-belts.

The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve of cone crusher rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined.

Main specifications of Tigers cone crusher:

Model		Max particle inlet (mm)	Adjusting range of output (mm)	Capacity (t/h)	Motor power (kw)	Overall dimension (mm)	Weight (t)
PYB	600	65	12-25	12-25	30	2800x1300x1700	5
PYD		35	3-15	5-23			5.5
PYB	900	115	15-50	50-90	55	3050x1640x2350	13
PYZ		60	5-20	20-65			13.1
PYD		40	3-13	15-50			13.2
PYB	1200	145	20-50	110-200	110	4152x2300x2980	24.7
PYZ		100	8-26	50-150			25
PYD		50	3-15	18-105			25.6
PYB	1750	215	25-60	280-480	160	4870x3800x4192	50.3
PYZ		185	10-30	115-320			50.3
PYD		85	5-15	75-230			50.4
PYB	2200	300	30-60	590-1000	260-280	7705x3430x4852	80
PYZ		230	10-30	200-580			80
PYD		100	5-15	120-340			81.4