Lamp Parameters:

GL-180STSL-80W

1)E40, E39 LED street bulb will replace traditional MH, HPS, HQ light bulb without any modification except the ballast , aiming at replacing 250W HPS / 300W MH
2)Size: Dia 90mm* L 285mm(SMD version)
3)LED Power consumption:80W
4)Power Consumption:5W
5)LED Source:54 SMD Edison/Bridgelux LED Chip
6)Initial Luminous Flux:6400Lm(SMD)
7)Maintained Luminous Flux:6300Lm
8)Lamp Base:E40/E39 is available
9)Input Voltage:24VDC/85~277VAC
10)Beam Angle:150degree
11)Color Temperature: CW(6000~6700K), NW(4000~4500K), WW(2700~3500K)
12)IP Grate:IP60
13)Lamp Efficientcy:>95%
14)Lamp life Span:>50, 000hours
15)Color Index(CRI):>80
16)No UV or IR harm
17)Working Temp;-40~50C
18)Working Humidity:10%~90% RH
19)Dimension: Φ105*285mm

E40 LED street light Package:

1pc/inner box:13cm*13cm*31cm 1.3kg Driver 1.2kg

12pcs/carton: 55cm*42cm*37cm 17.6kg Driver 15kg

E40 LED street light Advantages:

1, Our LED Street light applied to where using E40, E39 base fixture to replace traditonal bulb

2, Fast turn on and off without cooling or warming.

3, The lamp shape makes it both suitable for horizontal installation

4, Rotated base to make sure that the LEDs face down directly to the ground

E40 LED light Proposals:

1)As we know LED lamp produce too much thermal when it's on, the same as our E40 80W led street lamp we do not suggest to install in where has a high temperature weather, especially when it's installed in an unventilated fixture.

2)We all know that the E40 80W street lighthas a emitting beam angle 180 degree , we need all led side to shine directly all to the groud , so rotated socket is necessary, that's what our E40 80W street lamp designned.

3)Please bypass the traditional ballast if it exists when you are about to install the E40 80W

4)With a special designned driver to compaly with 277Vinput voltage for US commercial application