Application and principle

MK13160 grinder is suitable for grinding the surface of axles and end face. Its worktable takes a axial reciprocating motion, and grinding carriage adopts vertical cutting plan, which is driven by servo motor through ball screw. The axial reciprocating motion of worktable is driven by servo motor as well through dual-lead worm gear. Control system is Siemens 802D-SL.

Main application and structural features

1. Finishing recycle and compensation after finishing for wheel

2. Control method option: Automatic, manual, program, edit, diagnose

3. On-line help set for each grinding process parameter.

4. Manual intervention for each finishing parameter of grinding process

5. Fault display and check& self-diagnostics.

6. Compensation for backlash and gewindefehler.

7. Protection for overfeed, over load and over speed.

8. Power-off protection.

9. With RS23-C connector, able to communicate.

Specification and Technical parameters

Product Table

Max. diameter to be ground	Φ 1600mm
Max. length of workpiece	3000/4000/5000mm
Max. weight of workpiece	5t
Center frame supporting Dia. range	Φ 100-Φ 500mm
Center headstock/tailstock	Metric 100
Min. resolution of CNC	0.001mm
Speed of worktable vertical movement	100-3000mm/min
Speed of wheel frame transverse feeding	100-2000mm/min
Min feed of wheel	0.001μm
Max movement of wheel frame	850mm
Speed of workpiece (stepless)	6-60r/min
Specification of circular wheel	Φ 1200× 100× Φ 305mm
Movement of tailstock center sleeve	80mm
Speed of wheel line	35m/s
Max radii angle on the worktable	3° /2.5° /2°
Wheel drive motor power	22Kw