Molding Liquid Addition Cure Silicone Rubber Instruction

1. RTV-2 Addition Cure Silicone Rubber for Cement Crafts Mold Making: flowable liquid silicon and catalyst.

2. RTV-2 Addition Cure Silicone Rubber for Cement Crafts Mold Making cures at room temperature within 3 hours.

Molding Liquid Addition Cure Silicone Rubber Application

Molding Liquid Addition Cure Silicone Rubber is mainly applied for making various molds, reproduce concrete or cement, gypsum, gypsum, architecture, decorative arts and crafts, big statue, cultural relic product, etc.Reproduce poly resin, epoxy, polyurethane-polymer, plastic toy, gift and stationery, soaps, candle & lighting.

Molding Liquid Addition Cure Silicone Rubber Datasheet

Model	Color	Mixing ratio	Pot life (mins)	Demouled time (hrs)	Hardness(A0)	Tensile-strength (kgf/cm2)	Tear-strength (kgf/cm)	Viscosity (cps)	Elongation (%)
E625	translucent	1 : 1	30-60	4±1	25±2	35±2	25±2	6000±3000	≥400
E630	translucent	1 : 1	30-60	4±1	30±2	40±2	23±2	7000±3000	≥395
E635	translucent	1 : 1	30-60	4±1	35±2	47±2	22±2	8000±3000	≥470

Molding Liquid Addition Cure Silicone Rubber Operation

1. Step One: Take 100g of part A and add 100g of part B and mix the silicon rubber and the curing agent evenly.

2. Step Two: vacuum pumping

3. Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.

4. Step Three to useMolding Liquid Addition Cure Silicone Rubber: Brushing cast & Perfusion Molding operation.

Need any help on silicone rubber, please feel free to contact Ms Becky:

Tel:86-755-89212382

Mob/Whatsapp:86-18938867561

E-mail: hyjlyf(at)szrl(dot)net

Skype: Beckyliuting