Molding Liquid Addition Cure Silicone Rubber
Product Images
Product Property
| liquid : | low shrinkage |
| Product Status : | New |
| Sample Available : | yes |
| Shipment Terms : | fob,cfr,cif,Negotiable |
| Payment Mode : |
T/T,L/C,PayPal,WesternUnion |
Description
Molding Liquid Addition Cure Silicone Rubber Instruction
1. RTV-2 Addition Cure Silicone Rubber for Cement Crafts Mold Making: flowable liquid silicon and catalyst.
2. RTV-2 Addition Cure Silicone Rubber for Cement Crafts Mold Making cures at room temperature within 3 hours.
| Model | Color | Mixing ratio | Pot life (mins) | Demouled time (hrs) | Hardness(A0) | Tensile-strength (kgf/cm2) | Tear-strength (kgf/cm) | Viscosity (cps) | Elongation (%) |
| E625 | translucent | 1 : 1 | 30-60 | 4±1 | 25±2 | 35±2 | 25±2 | 6000±3000 | ≥400 |
| E630 | translucent | 1 : 1 | 30-60 | 4±1 | 30±2 | 40±2 | 23±2 | 7000±3000 | ≥395 |
| E635 | translucent | 1 : 1 | 30-60 | 4±1 | 35±2 | 47±2 | 22±2 | 8000±3000 | ≥470 |
Molding Liquid Addition Cure Silicone Rubber Operation
1. Step One: Take 100g of part A and add 100g of part B and mix the silicon rubber and the curing agent evenly.
2. Step Two: vacuum pumping
3. Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
4. Step Three to useMolding Liquid Addition Cure Silicone Rubber: Brushing cast & Perfusion Molding operation.
Need any help on silicone rubber, please feel free to contact Ms Sandy:
Tel:86-755-89212369
Mob/Whatsapp:86-18938867593
E-mail:
Skype:sandy19385
