- Tools, Implements, Cutlery, Spoons And Forks, Of Base Metal; Parts Thereof Of Base Metal
- Hand Tools, The Following : Spades, Shovels, Mattocks, Picks, Hoes, Forks And Rakes; Axes, Bill Hooks And Similar Hewing Tools; Secateurs And Pruners Of Any Kind; Scythes, Sickles, Hay Knives, Hedge Shears, Timber Wedges And Other Tools Of A Kind Used In Agriculture, Horticulture Or Forestry.
- Scythes, Sickles, Hay Knives, Timber Wedges And Other Hand Tools Of A Kind Used In Agriculture, Horticulture Or Forestry, With Working Parts Of Base Metal (excl. Spades, Shovels, Mattocks, Picks, Hoes, Rakes, Axes, Billhooks And Similar Hewing Tools, Poultry Shears, Secateurs And Similar One-handed Pruners And Shears, Hedge Shears, Two-handed Pruning Shears And Similar Two-handed Shears)
Orchard Harvest Machine
Product Images
Product Property
| Product Status : | New |
| Sample Available : | yes |
| Shipment Terms : | fob,cfr,cif,Negotiable |
| Payment Mode : |
T/T,D/P |
Description
8 m fruit picking machine
Technical specifications
1 The main technical performance parameters
Project GTBZ08
Working height mm 105174
Maximum platform height mm 85174
Maximum carrying capacity kg 200
stowed length mm 5768
stowed width mm 2300
stowed height mm 1597
Platform size mm 410 * 510 * 1100
The platform rotate 120 °
Minimum ground clearance mm 270
Travel speed km / h 1.5 ~ 4
Driving wheel 215 x 14
Engine Kubota
Weight kg 2300
Control voltage 12V
2 Technical performance
All the actions of the GTBZ08 operated by hand or foot control.
1) The GTBZ08 machine control system
PLC and CAN bus control mode, industrial controller, mounted on the chassis and the platform to simplify the cable and the hose, aviation plugs, protection grade IP65. advanced CAN bus control, simple lines, good reliability; simple maintenance and troubleshooting.
2)The platform has a foot switch, the platform arm can move up/dowm , extend/retract only when the foot switch be trod.
3 Security
1, The work bucket has automatic horzontal leveling function, the work bucket can adjust horizontal tilt angle automaticly whent it greater than 1.5 °.
2, The travel speed and the arm move speed will be automatic restricted when the platform reaches a certain height, The platform operation will be limited.when the chassis tilt angle pass than 3 °,
3, The op-box has shield protection.
4, jib head, cylinder piston rod, etc. there is dust and sand protection device.
5, The chassis has rings for easy lifting.
6, Audible and visual alarm when the equipment moving.
7, The machine is provided with a full manual emergency down system.
8, The emergency stop button enables the operator to quickly cut off the power when operating unforeseen circumstances, avoid the platform to continue movement.
3 Configuration list
Item Origin brand
Valve block assembly (including electromagnetic valve) Italian oil control (SANT)
The balancing valves Italy Sant
Controller Beijing Kaisang
Control handle Denmark Danfoss
Engine Kubota Japan
Oil pump Italian Salami
Motor Denmark Danfoss
