I'm Shirly. Please write me to the following address: shirlybai at alsafegascylinders point COM

or ziguangxue at HOT M ail point COM

We are alsafegascylinders point COM

Product Name: Seamless aluminum composite gas cylinders

Manufacturer: Liaoning Alsafe Technology Co., Ltd.

Standard: ISO11119, DOT CFFC, EN12245 or GB28053

Certificate: CE, TS

Third party Inspectors: TUV, CSEI, SGS

Filling content: Air, O2

Color: As shown in the picture or custom.

Thread: M18×1.5 or custom.

Form A, Form E available.

Features:

· Seamless aluminum ally 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. The high strength and safety-assured construction provides up to 300bar service pressure, which enlarges gas storage capacity to 1.5~2 times than that of aluminum or steel cylinders;

· Extremely Light weight, up to 60%-70% lighter than steel cylinders and 30-40% lighter than aluminum cylinders;

· No magnetism;

· High corrosion resist and special inner surface treatment, ensure storage gas clean and smelless;

· Stable performance;

· The specifications of carbon fiber composite cylinders behind covers a wide range of applications such as Self-contained breathing apparatus (SCBA), paintball gun, home oxygen therapy, aircraft oxygen, ELSA escape sets, and other applications that require lighter weight, stronger corrosion-resistance inner surface, and higher gas storage capacity.;

· Choice of worldwide top brands and enterprises.

Quality & Safety

1. We have established the quality guarantee system according to the Requirements for Boiler and Pressure Vessel Manufacturing Licensing of China and obtained the certificate issued by General Administration of Quality Supervision, Inspection and Quarantine of the P.R.C (AQSIQ), qualified to manufacture B1 and B3 grade pressure vessels.

2. Each new type of cylinders has to pass type tests held in qualified laboratories approved by third party inspector (TUV, CSEI for example) before mass production, including bend test, drop test, hydrostatic test, etc. according to relevant standards.

3. Every batch of cylinders (200 pieces as one batch normally) are manufactured and tested under supervision of local special equipment inspection and research institute and then issued batch test report.

4. Each finished cylinder has to pass leakage test before delivery to customers to ensure no leakage occurs.