The shale shaker is the primary treatment equipment in the solid control system. It is used to deal with the big drilling particles caught by the drilling mud, and protect the performance of the drilling fluid.

The drilling mud shale shaker produced by Dachuan Machinery has much advantage, like large handling capacity, high screening accuracy, low-energy and environmental protected.

The shale shaker produced by Dachuan Machinery has absorbed the advanced technology of design and manufacture, the structure has been optimized, therefore can clean the harmful solid phases in the drilling mud effectively and guarantee the high-precision recovery of drilling fluid. It is the most cost-effective product in domestic.

Dachuan Machinery can produce all kinds of shale shaker with different sizes and types, can meet the requirements of different handling capacity and installation sizes. Also, Dachuan Machinery can produce duplex or triplicate shale shakers according to the actual requirements of clients and supply the pipes.

In order to supply the excellent shale shaker with high screening accuracy, low-energy and no dust pollution, Dachuan Machinery controls the quality in each procedure.
1. To guarantee the durable structure of the shale shaker, the material is the GB steel from Beijing Shougang Company Limited, Shanghai Baogang Iron and steel Co., Ltd. and Tangshan Iron and steel Co., Ltd.
2. The used vibration motor is from the Italia joint venture Company named Oli. The motor has much advantage, like high strength vibration, large screening size, adjustable screen box angle, little noise, excellent performance and high efficiency.
3. The whole screen box has been heat treated, and there is anticorrosive coating on the surface to keep a long life of the shale shaker.
4. The area of shaker screen and handling capacity is large, the treatment effect is excellent.
5. Use the full adhesive edge hooked rigid shaker screen and plate closed fixture, it is convenient and easy to change the screens and can be changed into many kinds of screens.
6. Design the height of storage tank on the shale shaker reasonably to make the fluid buffer and flow, reduce the impaction by the fluid on the shaker screen, then extend the life of the shaker screen.
7. Using thermal relay overloading and open phase protection of electric control cabinet to guarantee the safety of the operators.

The linear shale shakers and translation elliptic shale shakers are widely use in the auto separation of the solid and liquid phases of well drilling, metallurgy, mine, chemical, trenchless engineering industries.

Shale Shaker Parameters

TYPE	DCS585-3/4	DCS630-3	DCS700-3/4	DCS830-2/3
Shake Locus	linear type or ellipse type
Motor Power	2×1.5/1.72KW	2×1.5KW	2×1.5/1.72KW	2×1.3/1.72KW
Shake Strength	≤7.0G
Amplitude	5~6mm
Thruput Per Screen	100/130 m3/h 440/572GPM	120 m3/h 528GPM	110/130 m3/h 440/572GPM	80/130 m3/h 352/528GPM
Angle Of Screen	-1°~5°
Motor frequency and voltage	380V/50HZ(Foreign custom motor according to customer requirements)
Screen Area	2/2.73 m2	2.36m2	2.2/2.94m2	1.8/2.7m2
Screen Specification	585×1165mm (40~250)	630×1250mm (40~250)	700×1050mm (40~250)	830×1080mm (40~250)
Remarks	The proportion of thruput per screen in the total amount is:1.2g/cm3，the viscosity is:45s