Description of Cartridge Heater:

1 Tube diameter: Φ3mm-Φ30mm

2 Tube Material:SS304;SS316, SS321, NICOLOY800 etc

3 Insulation Material:High-purity Mgo

4 Reisistance wire element:Ni-Cr or FeCr

5 Lead Connection Option: Crimped or Swaged leads

6 Lead and type of connection leads, 10" Fiberglass Standard(Wire options, silicone high temperature frberglass).

Heat intensity	Not exceeding 30Wcm2 (advisable)
Power	Depends on the dimension
Escape of current (when cold)	<=0.1mA a 242 v.
Insulation (when cold)	5 Min Ohmios 500 Watts minimum
Dielectric strength	1500v. 1/seg
Working temperature	750ºG max.
Tolerance of length	+/-1.5%
Tolerance of diameter	-0.01 a -0.06 m/m
Tolerance of cut of connexion	+/-15 mlm
Power tolerance (w)	5 % - 10 %
Cold areas	Depends on length and diameter 5-25mm

Features of Cartridge of Heaters:

Cartridge heater is cylindrical electrical heating elements. Protected with a stainless steel sheath Cartridge heater with right angle and hose eath, their watt density can reach 25 W/cm2 and their operating temperature can go up to 800°C (1472°F)

Mostly cartridge heater is used for heating up solids such as injection presses heating plates or various tools, cartridge heater can also be used for heating up water of gases under certain conditions. Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc . cartridge heaters are also commonly found in the chemical, electronics, medical equipment, packing and nuclear industries

Various cartridge heater technologies are available. The choice of technology will depend on technical specifications required and the application. Unless you know exactly which product you are looking for, we will recommend you the best solution for your need