Plaster expanded metal protects wall against cracks and fissures

Expanded metal mesh is most used as a reinforcing material in the interior decoration, and especially when the plastering work, so sometimes referred to as stucco netting. It is manufactured from sheet steel blade which cuts through and uniformly stretched in cells having a diamond shape. So, it has no bends or welds, and is very strong and durable, with a low weight. The ribbed surface makes it has the max adhesion.

When plastering walls it is used to keep the surface from cracking arising from temperature extremes and humidity fluctuations. It can be used for absolutely all surfaces of concrete and brick to wood, and even plaster ceilings. It must be mounted on a solid dowel-nails or anchor bolts to hold the work was easier.

To create a durable bonding plaster to the wall using various reinforcing mesh. They can be welded, made of galvanized steel wire, woven fiberglass. Each of these materials has its own advantages and disadvantages. But the best currently considered material is the light type expanded metal.

Expanded metal schematic diagram, with pattern size 50×18×0.7×0.5mm

We offer a wide range of reinforcement plaster mesh:

Materials: cold-rolled metal sheet - galvanized or uncoated. If you want to prevent rust stains and corrode, then use galvanized sheet.
Thickness of starting steel sheet: 0.5mm - 1.6mm, can be adjusted depend on properties of the finished plaster mesh.
Opening size (mm): 15×7, 20×8, 30×12, 40×16, 45×17, 50×18.
Roll height: 1.0m - 2.5m
Roll length: 10m, 15m, 20m, 25m, 30m.

Specification details as the following table, the schematic diagram of patter size shown as above picture.

Items	Pattern size (mm)	Width (m)	Length/roll (m)
PMEP-1507A	15×7×0.9×0.7	1.0 - 2.5	10, 15
PMEP-1507B	15×7×1.0×0.7	1.0 - 2.5	10, 15
PMEP-2008	20×8×0.9×0.7	1.0 - 2.5	10, 15, 20
PMEP-3012	30×12×0.9×0.7	1.0 - 2.5	10, 15, 20, 25
PMEP-4016A	40×16×0.9×0.7	1.0 - 2.5	15, 20, 25
PMEP-4016B	40×16×1.0×0.7	1.0 - 2.5	15, 20, 25, 30
PMEP-4517A	45×17×0.7×0.5	1.0 - 2.5	10, 15, 20, 25, 30
PMEP-4517B	45×17×1.2×0.7	1.0 - 2.5	10, 15, 20, 25, 30
PMEP-5018A	50×18×0.7×0.5	1.0 - 2.5	10, 20, 25, 30
PMEP-5018B	50×18×1.4×1.0	1.0 - 2.5	20, 25, 30

Advantages and benefits of light expanded metal mesh

• Expanded metal plastering mesh is the perfect combination of qualities such as strength and flexibility and low weight.
• Compared to welded mesh and woven mesh, it is the structural integrity - no stitches and welds, which greatly simplifies the work with the product during installation and transportation.
• Can be cut into any shape, while maintaining its strength.
• Due to its plasticity, it is convenient for mounting on curved and angled surfaces.
• Can be used in plastering and tiling works on virtually any surface: concrete, brick, plaster, wood.
• Has maximum grip and is easy to open, easy to handle and use.
• Unlike plastic and fiberglass mesh, expanded metal sheet has absolute resistance to combustion, and greater durability and resistance to harsh environments and water.

Light type plaster expanded metal roll

Plaster welded wire mesh - galvanized or black

Plaster welded mesh with 20×20mm mesh size made from 1.0mm galvanized carbon wire

Plastering welded wire mesh is primarily made of thin low-carbon drawn wire or galvanized wire with a diameter of 0.4 to1.5 mm, located in mutually perpendicular directions and interconnected by spot welding. Its wire diameter is much smaller than the standard welded wire mesh. It is perfect for plastering on uneven surfaces.

Welded mesh plastering has a wide scope. It can be used for the building inside and outside plaster reinforcement. As an essential piece of plastering work, it creates lasting plaster coating for absolutely all surfaces of concrete and brick to wood, and even plaster ceilings. Before plastering, the welded mesh must be mounted on wall by a solid dowel-nails or anchor bolts, which makes the plaster work easier. The welded wire mesh makes the plaster wall surface smooth and no crack, also excludes the impact of external factors on the wall.

If used for plastering in corrosion material, galvanized welded mesh is the best choice, in order to avoid the appearance of red streaks and spots. If used for interior plaster work and no corrosion material, needs no galvanizing, common carbon wire mesh will work well. So most of the plaster mesh - it is not galvanized mesh.

Welded wire mesh used for inside plastering work to

Chain link plaster mesh reinforces plaster surface

Chain link Plastering mesh is a type of light chain link fence used to prevent wall cracks due to temperature changes. With its light weight, thin wire from 0.5mm to 2.0mm and small mesh opening from 5mm to 25mm, it is also called mini or micro chain wire fence.

Chain link fence used as plastering mesh

Low carbon steel and galvanized wire are its mainly materials. Due to the mesh for reinforcing plaster surface does not involve direct contact with the grid environment, in order to save money, the most commonly used is uncoated black mesh.

It is mainly used in finishing works for the reinforcement of the walls (architectural interior wall plaster and outdoor wall insulation plaster) before applying the plaster layer - chain link mesh nailed to the wall then immediately plastering. It is particularly important in the construction of industrial plants, in which the walls are exposed to high vibration impacts as a result of the machine, presses and other powerful mechanisms.

Basic parameters and dimensions

Mesh opening shape:
Rhombic mesh opening acute angle rhombus 60°- mesh opening 5mm, 10mm and 15mm;
Square mesh opening angle 90°- mesh opening 20mm and 25 mm.
Wire diameter: 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm, 1.8mm, 2.0mm.

Chain link mesh items	Mesh size mm	Wire diameter mm	Roll height m	Roll length m
PMCL-05	5×5	0.5, 0.6, 0.8, 1.0	1.0	10, 20
PMCL-10	10×10	1.2, 1.4	1.0	10, 20
PMCL-12	12×12	1.2, 1.4	1.0, 1.2	10, 20
PMCL-15	15×15	1.2, 1.4, 1.6	1.0, 1.2	10, 20
PMCL-20	20×20	1.4, 1.6, 1.8	1.2, 1.5	10, 15
PMCL-25	25×25	1.6, 1.8, 2.0	1.5, 2.0	10, 15

Woven wire mesh for interior walls and facades plaster

Plastering soft woven wire mesh with square mesh opening made from carbon wire with anticorrosion zinc coating or without zinc coating. Plaster mesh woven wire greatly facilitates work on finishing of buildings and facades. Using it can prevents cracks occurring by shrinkage material and significantly increases the mechanical strength and durability of the plastering layers.

Woven plastering Mesh applications:

• For the restoration and reinforcement in plaster works.
• As a reinforcing material in painting and decorating interior walls and facades.
• Increases the mechanical strength and durability of the plastering layers.
• For prevention of deformation, shrinkage occurring materials.
• To enhance the strength of finishing layers.

Woven wire mesh plaster technical specifications
Materials: heat-treated low carbon galvanized wire or black wire.
Square mesh - mesh size 2mm to 20mm.
Wire diameter 0.4mm to 2.5 mm.
Roll width: 1000mm, 1300mm, 1500mm, 1800mm, 2000mm, 3000mm.
Roll length: 30m, 50m, 60m, 80m.

Items	Mesh size mm	Wire diameter, mm
PMWM-20	2	0.40, 0.50, 0.60, 1.00, 1.20
PMWM-22	2.2	0.45, 0.70
PMWM-25	2.5	0.40, 0.50, 0.60
PMWM-28	2.8	0.45, 0.90
PMWM-32	3.2	0.50, 0.80, 1.20
PMWM-35	3.5	0.70, 0.90, 1.00
PMWM-40	4	0.60, 1.00, 1.20
PMWM-45	4.5	0.70, 0.90, 1.80
PMWM-50	5	0.70, 1.20, 1.60, 2.00

Items	Mesh size mm	Wire diameter, mm
PMWM-60	6	0.70, 1.20, 2.00
PMWM-70	7	0.70, 1.20, 1.80
PMWM-80	8	0.70, 1.20, 1.60, 2.00
PMWM-90	9	1.00, 2.00, 2.20
PMWM-100	10	0.7, 0.8, 1.00, 2.00
PMWM-120	12	0.8, 1.00, 1.20, 2.00
PMWM-140	14	0.8, 1.00, 1.40, 2.00
PMWM-160	16	1, 60. 2, 50
PMWM-180	18	1.80, 2.50
PMWM-200	20	1.60, 2.00, 2.50

In construction, usually use plaster mesh fabric with mesh size from 8mm to 14mm, for example, 12×12×1.0mm, 12×12×1.2mm, 14×14×1.2mm and 14×14×1.4mm woven mesh fabrics are the most often used.

Plastering soft woven wire mesh fabric in black color

Rolls of black soft woven plaster mesh in our warehouse

Our plastering woven mesh is producing under strictly quality control: interlacing wires warp and weft woven in a grid must be right, no skip wires, no mechanical damage, kinks, broken and stitched seats.

Packing woven mesh
Rolls of fabric mesh must be annealed wire tied around the edges and the middle of the roll. The ends are wrapped with a paper roll, then the polymer film or fabric packaging. Usually, A roll weight no more than 80 kg.