Standard injector parameters table

On the performance parameters of low inertia \ standard injection pump pintle standard injector orifice plate standard injector

Model ISO7440B64-20.7,

ISO7440B84-20.7 ISO7440A14-17.2,

ISO7440A14-14.7 ISO7440A54-17.2,

ISO7440A84-20.7 etc.

Opening pressure of 20.7+0.3Mpa,

25+0.3Mpa 17.2+0.3Mpa 17.2+0.3Mpa,

20.7+0.3Mpa

Plate diameter were 0.4, with 0.5, with 0.6, with 0.7, 0.8 with 0.4, there were 0.5, with 0.6, 0.7 with 0.8, with a diameter

The installation length 55mm

Dimensions 218 x 115 x 48mm 193 x 140 x 231 x 144 x 40mm 40mm

Application of pump models of PW, PB, PN, PW2000, P7100, BQ, I, II, B, A, A, AW, AD, I etc.

Notes 1, periodically adjusting opening pressure. In 2, the injector fuel quantity changes suddenly, usually iron block in the orifice. In 3, the injector is disassembled for cleaning re-assembly, cannot be injector, orifice plate, high-pressure tubing pick change.