supply cheap and high quality grinding balls
Product Images
Product Property
Product Status : | New |
Sample Available : | yes |
Shipment Terms : | fob,cfr,cif |
Payment Mode : |
T/T,L/C,cash,Credit Card |
Description
1.GRINDING STEEL BALLS (STANDARD: YB/T 091-2005)
(1) Forged steel grinding balls:
Suit Equipment: both drying and wet ball mills
Tech Specs:
· The forged plant operates four production lines and sources input barstock directly from HM rolled grinding balls.
· It offers a hardness of ≈65HRc in surface, slowly decreasing towards the core.
· Diameters available: 20 - 15Omm (1½” --5″ ).
Key Benefits:
· Improved wear resistance due to quenching and tempering..
· Steady milling conditions due to wear reduction in wear rate.
It is the best-suited solution to fight wear: it is highly resistant to both abrasion and impact.
BRAND | Materials | C | Mn | Si | Cr | S | P | Mo | Ni |
HM B-1 | 50MN | 0.58-0.65 | 0.85-1.2 | 0.17-0.37 | 0.2-0.4 | ≤0.035 | ≤0.035 |
|
|
HM B-2 | 60MN | 0.75-0.8 | 0.8-1.0 | 0.15-0.25 | 0.55-0.6 | ≤0.03 | ≤0.03 |
|
|
HM B-3 | 65MN | 0.55-0.6 | 0.7-0.8 | 0.17-0.37 | 0.9-1.1 | ≤0.03 | ≤0.03 | 0.05-0.1 | 0.01-0.05 |
HM B-4 | 75Mn | 0.45-0.55 | 0.7-1.0 | 0.17-0.37 |
| ≤0.03 | ≤0.03 |
|
|
HM B-5 | 75MnCr | 0.68-0.75 | 0.8-0.9 | 0.17-0.37 | 0.4-0.5 | ≤0.03 | ≤0.03 |
|
|
HM B-6 | 75MnSi | 0.7-0.9 | 0.8-1.02 | 0.1-0.4 | 0.7-1.05 | ≤0.02 | ≤0.02 | 0.03-0.15 | 0-0.05 |
HM B-6A | 75MnSi | 0.95-1.03 | 0.92-1.0 | 0.2-0.3 | 0.4-0.6 | ≤0.02 | ≤0.02 |
|
|
HM B-7 | Wear-resistant Alloy | 0.65-0.75 | 0.9-1.0 | 0.17-0.37 | 0.7-0.9 | ≤0.02 | ≤0.02 | 0.05-0.1 | 0.1-0.2 |
2. CASTING ALLOY GRINDINGBALLS(STANDARD:GB/T 17445-1998)
Suit Equipment: cement drying grinding mills
SIZE: 20mm-120mm
| Material | C | Si | Cr | Mn | S | P |
Special-1 | Cr-22-32% | 2.0-2.8 | ≤1.0 | 22-32 | 0.5-2.0 | ≤0.06 | ≤0.08 |
Special-2 | Cr-17-22% | 2.0-2.8 | ≤1.0 | 17-22 | 0.5-2.0 | ≤0.06 | ≤0.08 |
Special-3 | Cr-15-17% | 2.2-3.0 | ≤1.0 | 15-17 | 0.5-2.0 | ≤0.06 | ≤0.08 |
Special-4 | Cr-11-14% | 2.2-3.2 | ≤1.0 | 11-14 | 0.5-2.5 | ≤0.06 | ≤0.08 |
Special-5 | Cr-5-10% | 2.1-3.2 | ≤1.2 | 5-10 | 0.5-1.5 | ≤0.06 | ≤0.08 |
Special-6 | Cr-1.5-3% | 2.2-3.5 | ≤1.2 | 1.5-3 | 0.5-1.5 | ≤0.06 | ≤0.08 |