Cleaning machine based on motor configuration is divided into single phase 220V and phase 380V two models, an external power supply voltage fluctuation can not be higher or lower than the rated voltage 5%.

Cleaning machine principle of work

The 1 cleaning machine is suitable for cleaning of various models of diesel car. This product is a unique design, advanced technology, convenient operation, can effectively remove the magazine and water tank.

2 this machine in cleaning the tank, without the need for removal of oil tank and pipeline, its working principle is by pumping oil tank of diesel extraction, into the coarse filter tank for primary filtration, will large particles of impurities and water filter, then by a gear pump pressure, into the fine filter tank, the fine particles of impurities through deep filter filter. After the two stage filter clean diesel with 1 kg of pressure from high pressure nozzle jet to tank side cavity and dead ends, the tank of the magazine and the oil with the muddy, to every 30 litres of flow loop filter. Eventually the diesel oil in the oil tank to achieve clean.

3 cleaning the tank decide the time of oil storage tank tank number and the clean degree, according to the experience of general cleaning time is about oil tank oil storing quantity / 30 L / min ( 5 ~ 8 )

Method of operation

1 direct circulation type cleaning method 1) heads bent into a proper angle, through the baffle hole is inserted into the lateral cavity;

2) the oil pumping pipe is inserted in the tank to the nadir or for cleaning chamber angle hole at the side;

3) is switched on the power supply, the switch to a clockwise direction, i.e. normal cleaning cleaning machine;

4) portable spray rod, with the nozzle of jet fuel tank and corner focus;

2 emptying the circulation type cleaning

1 clean container is placed under the tank, open the mailbox at the bottom of the diesel oil discharge screw, all released;

2 will be pumping oil into the oil receiving container, the injection tube is inserted into the tank;

3 switch on the power, will switch to veer;

4 moves back and forth injection rod, the lower end of the rod so that the fuel injection nozzle to clean the tank every corner, to focus on cleaning oil tank inner wall and corner.

Note: filter out of the magazine and water through the coarse filter tank at the lower part of the window

Reminder.

1) method, proposed to the side of the tire pad 5-10 cm, the oil tank is tilted;

2) cleaning the tank of the length of time from oil tank oil quantity decision;

3) oil tank oil is less than 1 / 2 or the empty tank is recommended when cleaning rotary head;

4) oil tank oil quantity is more than 1 / 2 recommended cleaning with nozzle

5) in the small fuel tank cleaning tank, suggest using second methods of cleaning.

Maintenance and repair

1 unidirectional motor uses three core plug, switch power supply can not be cut off, will be required to repair power plug, due to motor starting capacitor is installed and running capacitor, please note capacitor discharge;

2 phase motor uses four core plug, veering and reversals in power on test protocol, will switch to any position, pumped from the tank diesel spare is clockwise direction;

3 if the motor starting operation difficulties, inability or normal operation when stopping, mostly due to the power to the washing machine between the socket and wire diameter fine line is too long, and causes the voltage is too low, so please timely replacement of large diameter wire.

The replacement of filter: replacing the filter element, the cleaning machine in the diesel exhaust net, as follows:

1) the oil pumping pipe and nozzle all out of oil, so that it does not contact the diesel;

2) open clockwise, until no longer injection nozzle;

3) open back, until the oil pumping pipe no longer injection.

4) open the coarse filtering blowoff valve, to switch to the inverted position, with the magazine's diesel all exhausted, close the valve;

5) open the fine filtering blowoff valve, to switch to a clockwise position, with impurities in diesel all exhausted, close the valve;

6) open the fine filter replacement cartridge.