1.Feature:
UHMW-PE has the following features: low friction coefficient, low waste frication, fabricate by itself, resisting sticking, resisting incrustation, corrosion proof, anti bounce, flexibility, resisting low temperature, aging resisting, standing high pressure, safety, light, so it has excellent physical and chemical characters and wide usage future and range. The pipe which made by UHPE can be used in the miner, food, chemical, coal etc. field. While as it is difficult to processing, so the making pipe efficient is low, so strain the development and usage of the pipe. Our machine can produce without stopping, improving the efficient greatly; lower the price to produce the pipe.
Our company Manufactures UHMWPE tubes, plates, bar and the production line has the following outstanding features:
1.A tractor serves several purposes: Only replace a few of components at this production line, it can manufacture other tubular products, plank stuff or steel bar. The largest diameter range of tubular product is 930mm, and the plank stuff’s largest breadth can reach to 1220mmThe steel bar’s maximum diameter can reach 200mm.
2.High molecular weight products: utilize the production line and our company’s prescription can extrude 3.5 million molecular weight of super-high polythene.The molecular weight of products is no less than 3 million; While molecular weight of products that the extruding molecular weight of 2.5 million super-high polythene is no less than 2 million.
3. Low-cost products, material purchasing convenient: our company’s own prescription, material purchasing easy and price low.
4.Easy to be operated, stable extrusion: special extruding system and control equipment make the operation easy, products extruding steady, even if power cut suddenly or other reasons lead the engine break-down, neither influence the following products extruding, reduce material wasting, saving time, enhancing efficiency and reducing cost.
5. Electrical device and other components standardization higher: adopt more standard components, change easier, lower-price; electric components all made in China, price lower, purchase convenient.
6. Excellent appearance: the special extruding system not only extrudes higher molecular weight material, but also presents excellent appearance of the products as smooth, inner stress low, even colour change process. The products chromatic aberration is small and the colour is well distributed.
2. Parameter:

Model	FD-UHPE930G
Main extruder type	SJ-150/20
Screw diameter	Φ150
Screw of linear elements	special design
L/D Ratio of screw	20
Die diameter	Max.930mm
Output kg/h	10-20kg/h
Electric motor power	37KW
Speed timing type	Frequency control
Heat up mode	Cast aluminium of stove
Heat r zone of the barrel	5zone
Heat cylinder power	40kw
Cooling of Barrel	air Cooling
Cooling of barrel power	5x0.37kw
Heat zone of the die	5zone
Moulding mode	by cycle water-cooling
Products specifications	Φ63-Φ930
Line speed	0-400mm/h
Centre height of extruder	1210mm