Z-1 PVDF Granules for Injection Molding
Product Images
Product Property
| Product Status : | New |
| Sample Available : | yes |
| Payment Mode : |
Bank Transfer,L/C |
Description
Z-1 PVDF granules for injection molding have lower melting viscosity, it is suitable for manufacturing PVDF finished products by injection moulding.
Z-1 PVDF granules for injection molding as raw materials, the finished products has excellent mechanical strength and tenacity, It can not be eroded by acid, alkali, strong oxidant, halogens, good durability to aliphatic hydrocarbons, aromatic hydrocarbons, alcohol, aldehyde etc, In the work of hydrochloric acid, nitric acid, sulfuric acid, dilute alkali liquor, dense alkali liquor(40%) and 100deg. C temperature, its performance not be changed. Others, Z-1 PVDF finished products has the properties of y-Ray resistant, UV resistant, and durability in wide temperature range.
Application:manufacture PVDF tubing, PVDF pipes, PVDF sheet, PVDF valves etc.
Z-1 main technical parameter:
General Appearance :White translucent granules
Standard specific gravity:1.77-1.79
Melting point:165-171deg.C
Melt flow index:15-25g/10min
Z-1 PVDF granules for injection molding as raw materials, the finished products has excellent mechanical strength and tenacity, It can not be eroded by acid, alkali, strong oxidant, halogens, good durability to aliphatic hydrocarbons, aromatic hydrocarbons, alcohol, aldehyde etc, In the work of hydrochloric acid, nitric acid, sulfuric acid, dilute alkali liquor, dense alkali liquor(40%) and 100deg. C temperature, its performance not be changed. Others, Z-1 PVDF finished products has the properties of y-Ray resistant, UV resistant, and durability in wide temperature range.
Application:manufacture PVDF tubing, PVDF pipes, PVDF sheet, PVDF valves etc.
Z-1 main technical parameter:
General Appearance :White translucent granules
Standard specific gravity:1.77-1.79
Melting point:165-171deg.C
Melt flow index:15-25g/10min
