QINGDAO CHINA

Qingdao An International Business City.

  1. Products Categories
  2. Iron And Steel
    1. Pig iron and spiegeleisen in pigs, blocks or other primary forms.
    2. Ferro-alloys.
    3. Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 %, in lumps, pellets or similar forms.
    4. Ferrous waste and scrap; remelting scrap ingots of iron or steel.
    5. Granules and powders, of pig iron, spiegeleisen, iron or steel.
    6. Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03).
    7. Semi-finished products of iron or non-alloy steel.
    8. Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated.
    9. Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated.
    10. Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated.
    11. Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated.
    12. Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated.
    13. Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel.
    14. Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling.
    15. Other bars and rods of iron or non-alloy steel.
    16. Angles, shapes and sections of iron or non-alloy steel.
    17. Wire of iron or non-alloy steel.
    18. Stainless steel in ingots or other primary forms; semi-finished products of stainless steel.
    19. Flat-rolled products of stainless steel, of a width of 600 mm or more.
    20. Flat-rolled products of stainless steel, of a width of less than 600 mm.
    21. Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel.
    22. Other bars and rods of stainless steel; angles, shapes and sections of stainless steel.
    23. Wire of stainless steel.
    24. Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel.
    25. Flat-rolled products of other alloy steel, of a width of 600 mm or more.
    26. Flat-rolled products of other alloy steel, of a width of less than 600 mm.
    27. Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel.
    28. Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel.
    29. Wire of other alloy steel.
  3. Angles, Shapes And Sections Of Iron Or Non-alloy Steel.
    1. U, I or H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm
    2. L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm
    3. T sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm
    4. U sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm
    5. I sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm
    6. H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm
    7. L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm
    8. Sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. U, I, H, L or T sections)
    9. Angles, shapes and sections, of iron or non-alloy steel, from flat-rolled products simply cold-formed or cold-finished (excl. profiled sheet)
    10. Angles, shapes and sections, of iron or non-alloy steel, not further worked than cold-formed or cold-finished (excl. profiled sheet)
    11. Angles, shapes and sections, of iron or non-alloy steel, cold-formed or cold-finished from flat-rolled products and further worked
    12. Angles, shapes and sections, of iron or non-alloy steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. (excl. from flat-rolled products)
  4. L Sections Of Iron Or Non-alloy Steel, Not Further Worked Than Hot-rolled, Hot-drawn Or Extruded, Of A Height Of < 80 Mm

L Sections Of Iron Or Non-alloy Steel, Not Further Worked Than Hot-rolled, Hot-drawn Or Extruded, Of A Height Of < 80 Mm

Harmonization System Code:721621

Product Not Found.

Featured Suppliers:

A glove for every situation,cut resistance,chemical resistance, or disposable gloves