- Impregnated, Coated, Covered Or Laminated Textile Fabrics; Textile Articles Of A Kind Suitable For Industrial Use
- Textile Fabrics Impregnated, Coated, Covered Or Laminated With Plastics, Other Than Those Of Heading 59.02.
- Textile Fabrics Impregnated, Coated, Covered Or Laminated With Poly"vinyl Chloride" (excl. Wallcoverings Of Textile Materials Impregnated Or Covered With Poly"vinyl Chloride"; Floor Coverings Consisting Of A Textile Backing And A Top Layer Or Covering Of Poly"vinyl Chloride")
3D Metal Glass Fiber Projection Screen Fabric
Product Images
Product Property
| Product Status : | New |
| Sample Available : | yes |
| Shipment Terms : | fob,cfr,cif,Negotiable |
| Payment Mode : |
T/T,L/C,cash,PayPal,WesternUnion |
Description
| Product Name：3D Metal Glass Fiber Projection Screen Fabric | ||||
| Product Item No. | KW018 | Unit | reference standard | |
| Base fabric | Fiberglass Fabric | |||
| Weight | 520(±20)gsm | |||
| Tensile Load | Meridional | ≥2000 | N/5cm | DIN53354 |
| Zonal | N/5cm | |||
| Tear Load | Meridional | ≥70 | N/5cm | DIN53363 |
| Zonal | ≥100 | N/5cm | ||
| Peel off Strength | Meridional | ≥38 | N/5cm | DIN53357 |
| Zonal | N/5cm | |||
| Fire Resistant | YES | Mildew Proof | YES | |
| Cleanable | YES | Anti-static | YES | |
| Viewing Angle | 80°(L&R40°) | Gain | 1.8~2.0 | |
| Suitable temperature | -20° ~ +60° | Product structure | 3D PVC film+Glass Fiber+PVC film | |
| Available width | 1.85m/2.15m/2.5m/2.8m/3.20m | Thickness | 0.42mm±0.02mm | |
| General Recommendations: ● Cleaning with soapy water is sufficient . Do not use powder or abrasive paste. We advise that you test any cleaning agent on a small area first . ● Radio Frequency welding : Optimization needed depending on machine . When welding the joins , should be made using the same side of the roll(right to right and left to left .) ● Digital printing and spray coating with solvent inks : Depends upon the type of machine and the nature of the ink . We always recommend preliminary testing prior to full production running . ● After unrolling : For a good lay flat , cut panels should be allowed to relax for 24 hours and then should be trimmed square. ● Storage & Handling : We recommend indoor storage (no sunlight) at room temperature(max.23℃), storage time less than six months after production date.Film should be stored at room temperature (max.23℃, min.24h ) before processing. | ||||
| Comments:Other colors, thickness, or embosses , can be developed on demand. |
