Introduction

This flotation cell is invented by our company and has been applied for a patent. Compared with the traditional flotation cell, our equipment with the agitation.

Features

1. Many one-way abrasion-resistant rubber valves are equipped at the bottom of flotation cell .

2. The production expense and installed power are separately reduced by 70% and 60% compared to that of the traditional equipment.

3. Dust removal unit, screening factory and screening equipments are leaved out, which reduce civil engineering investment, the floor area and the cost of labor power and management.

4. The max feeding size is 160mm.

Application

It is used for coarse grinding after coarse crushing.

Working principle

The essential component is a cylinder with bigger diameter and smaller length which is slowly revolved via transmission machinery. Materials are fed into central sleeve where ores are fully grinded due to the falling impact and autogenous grinding. Ore materials, which are eligible for the particle size standard and pass through grid plate, are discharged from another side of central sleeve, with the aid of overflow water.

Technical parameter

Number	Model	Capacity (t/d)	· Diameter (m)	Height (m)	Volume (m³)	Air suction amount (m³/min)	Air pressure (Kpa)	Weight (t)
1	XQFφ1000×7000	45	1.0	7.0	4.87	0.94	120.90	3.5
2	XQFφ1000×6400	40	1.0	6.4	4.40	0.94	109.20	3.1
3	XQFφ1000×5800	39	1.0	5.8	3.93	0.94	97.50	2.9
4	XQFφ1500×7000	100	1.5	7.0	10.96	2.12	120.90	5.4
5	XQFφ1500×6400	98	1.5	6.4	9.90	2.12	109.20	4.9
6	XQFφ1500×5800	86	1.5	5.8	8.84	2.12	97.50	4.5
7	XQFφ2000×7000	190	2.0	7.0	19.48	3.77	120.90	7.5
8	XQFφ2000×6400	170	2.0	6.4	17.59	3.77	109.20	6.8
9	XQFφ2000×5800	150	2.0	5.8	15.71	3.77	97.50	6.2
10	XQFφ2500×7000	300	2.5	7.0	30.43	5.89	120.90	9.7
11	XQFφ2500×6400	270	2.5	6.4	27.49	5.89	109.20	8.8
12	XQFφ2500×5800	240	2.5	5.8	24.54	5.89	97.50	8
13	XQFφ3000×7000	420	3.0	7.0	43.83	8.48	120.90	12
14	XQFφ3000×6400	370	3.0	6.4	39.58	8.48	109.20	10.9
15	XQFφ3000×5800	350	3.0	5.8	35.34	8.48	97.50	9.9
16	XQFφ3500×7000	580	3.5	7.0	59.65	11.55	120.90	14.50
17	XQFφ3500×6400	520	3.5	6.4	53.88	11.55	109.20	13.20
18	XQFφ3500×5800	480	3.5	5.8	48.11	11.55	97.50	12.00
19	XQFφ4000×7000	780	4.0	7.0	77.91	15.08	120.90	16.00
20	XQFφ4000×6400	700	4.0	6.4	70.37	15.08	109.20	15.20
21	XQFφ4000×5800	620	4.0	5.8	62.83	15.08	97.50	14.40