PC-301 Papermaking Resin Barrier Control Agent Chemicals

[Characteristic]

decrease yield loss and power off times caused by cleaning sediment

decrease yield loss and web break caused by organic sediments

improve the paper quality

allow higher paper-manufacturing temperature

[Products Explanation]

PC - 301 Resin Barrier Control Agent is a nonionic liquid substance, it can surround resin and other hydrophobic organic pollutant exists in system, and make the sediments effectively controlled. Because it has nonionic and detergent properties, and all comprised of organic composition, so it can be in high effective in all kinds of environment, even in sensitive area the traditional sediment control agent cannot be used , it can maintain efficient.

PC - 301 is through the debonding action to make resin and viscose under control.viscose substances of the waste (e.g., acetate, styrenebutadiene rubber, acrylic, etc.)can flow out of the system with the paper web or domestic sewage system, not sticky on nets or blanket; Also, resin from merchandise plasma or pulp mill brings together with paper web in stable state outflow of the system, and not gathered into a larger group glued to the nets or blanket.

PC - 301 as an important component of organic sediment control procedures, usually used for organic sticky elimination from the feed pulp . The final retention time is very important.because the products always retained in the closed system, thus ensure the better effect.

[Product Basic Properties]

Apperance-yellow

Flashing Point-90 oC

Frozen point--0 oC

PH Value-6~8

Propotion(21 oC)- 1~1.05

viscosity(21 oC)-2300cps

[Products Application]

PC - 301 generally continuous directly added before sediments produced point, in order to gain better control effect, also often required to choose multiple adding points.

PC - 301 typical dosage is: control resin is: 0.7 ~ 1.5 kg/tons absolutely dry plasma; control viscose is commonly: 1.5 ~ 2.5 kg/tons absolutely dry pulp. Also depends on the problem severity.

PC - 301 dosage and joining point should decides as the content and properties of resin and viscosity in the system. added after beating pulp(original pulp), the wasted paper deinking pulp generally add in hot dispersing (bleaching) system, wood pulp can also add in waterpower pulp machine, used together with cleaner, can get better effect. Xiangyu company's technical representatives will help you choose the right joint point and the dosage.

[Pakage]

PC - 301 can be pakaged in 25 kg/barrel or 200kg/barrel , or according to the customer requirement.

[Storage]

quality guarantee period is 12 months, Indoor avoid light depositing, prevent freezing.