- Soap, Organic Surface-active Agents, Washing Preparations, Lubricating Preparations, Artificial Waxes, Prepared Waxes, Polishing Or Scouring Preparations, Candles And Similar Articles, Modelling Pastes, ‘dental Waxes᾿ And Dental Preparation
- Lubricating Preparations (including Cutting-oil Preparations, Bolt Or Nut Release Preparations, Anti-rust Or Anti-corrosion Preparations And Mould Release Preparations, Based On Lubricants) And Preparations Of A Kind Used For The Oil Or Grease Treatment Of Textile Materials, Leather, Furskins Or Other Materials, But Excluding Preparations Containing, As Basic Constituents, 70 % Or More By Weight Of Petroleum Oils Or Of Oils Obtained From Bituminous Minerals.
- Lubricant Preparations, Incl. Cutting-oil Preparations, Bolt Or Nut Release Preparations, Anti-rust Or Anti-corrosion Preparations And Mould-release Preparations, Based On Lubricants And Containing Petroleum Oil Or Bituminous Mineral Oil (excl. Preparations Containing, As Basic Constituents, >= 70% Of Petroleum Oil Or Bituminous Mineral Oil By Weight And Preparations For Treating Textiles, Leather, Furskins And Other Materials)
Wire Drawing Lubricant JRD450
Product Property
| Product Status : | New |
| Sample Available : | yes |
| Shipment Terms : | fob,cfr,cif,Negotiable |
| Payment Mode : |
T/T,L/C |
Description
JRD-450 is a high fatty acid sodium soap, for used in wet drawing (water tank drawing), which adjust the lubricant concentration from 0.5% to 0.6%, according to the wire drawing conditions, adjust the level of concentration. For the first time formulated 60-70 ℃ hot water available, as per 1:8, after stirring paste, pour into tank or lubricating fluid circulating pool, the dry powder can be added directly into the tank later.
It may be foaming when drawing started, but after using the 1-2 times, the foam will disappear and form into a certain viscosity lubricating fluid.
When the lubricant is not be used in the water tank for long time, due to the growth of anaerobic bacteria, the lubricating fluid may turn black and stank, then you can run the machine for times, after aeration, color and odor disappears, it would not affect the use of lubricating fluid.
Light yellow coating on the wire surface is the perfect state when water tank drawing, it is good for the mold and can prolong it service life, improve production efficiency. If scratches appeared on the surface of the wire, you need to check the concentration of lubricant and mold conditions.
