- Soap, Organic Surface-active Agents, Washing Preparations, Lubricating Preparations, Artificial Waxes, Prepared Waxes, Polishing Or Scouring Preparations, Candles And Similar Articles, Modelling Pastes, ‘dental Waxes᾿ And Dental Preparation
- Lubricating Preparations (including Cutting-oil Preparations, Bolt Or Nut Release Preparations, Anti-rust Or Anti-corrosion Preparations And Mould Release Preparations, Based On Lubricants) And Preparations Of A Kind Used For The Oil Or Grease Treatment Of Textile Materials, Leather, Furskins Or Other Materials, But Excluding Preparations Containing, As Basic Constituents, 70 % Or More By Weight Of Petroleum Oils Or Of Oils Obtained From Bituminous Minerals.
- Lubricant Preparations, Incl. Cutting-oil Preparations, Bolt Or Nut Release Preparations, Anti-rust Or Anti-corrosion Preparations And Mould-release Preparations, Based On Lubricants And Containing Petroleum Oil Or Bituminous Mineral Oil (excl. Preparations Containing, As Basic Constituents, >= 70% Of Petroleum Oil Or Bituminous Mineral Oil By Weight And Preparations For Treating Textiles, Leather, Furskins And Other Materials)
Wire Drawing Lubricant JRD800
Product Property
| Product Status : | New |
| Sample Available : | yes |
| Shipment Terms : | fob,cfr,cif,Negotiable |
| Payment Mode : |
T/T,L/C |
Description
Overview:
JRD-800 sodium soap lubricant is composed of sodium stearate and solid lubricants, anti-wear agents and additives synthesized by a special process, mainly used for making rope wire, prestressed steel wire, gas shielded welding wire, steel wire tire edge, stainless steel wire drawing.
Performance:
Fatty acid content: 75%-85% Color: white
Softening point: 220-250 ℃ Water content: 1.5%-2.3%
Decomposition temperature of 330-410 ℃ Size: medium particles
Application:
For phosphate, boron-treated steel, mainly for later passes of drawing, but also for all passes use, make film thinner. When it use calcium-based lubricant in the front passes, the speed in thick size drawing is 100-480m / min, while the small size of the drawing speed is 720-900m/min. For low carbon steel wire drawing, speed is 600 -1020m/min.
