shot blasting machine is specially designed for the surface cleaning and intensifying of H beam.

HP 8016shot-blasting machine

Major technical parameter

Work-piece size	Cross section (width × height)	800×1600mm
	Length of the wore piece	3500-16000mm
Quality standard	Surface cleanness		Sa2-Sa2.5
	roughness		15-50um
Production rate passing speed of the work piece	400-2500mm/min
impeller head	Type			Q034
	Quantity			8
	Shot blasting capacity			8×280Kg/min
	Power rate			8×11KW
Elevator	Lifting capacity			120t/h
	Power rate			7.5kw
Longitudinal spiral conveyer	Conveying capacity			120t/h
	Power rate			7.5kw
separator	Separating capacity			120t/h
Ball-clearing system	Power rate			11kw
	Load-carrying capacity			4293m3/h
Input/output roller way	Capacity			1000kg/m
	Power			2×2.2kw
	Delivery speed			400-4000mm/min
	Length of the roller			13000mm×2
Dust removal system	Blowing rate			16000 m3/h
	power			15kw+3kw
Total power	About 140kw

Performance

HP8016 H beam shot blasting machine is specially designed for the surface cleaning and intensifying of H beam. it can intensifying roughness and increase the adhesion effect. there are 8 shot-blasting device and anti-corrosion device on both sides of the blasting area. they will be installed at the best piece according to the characteristics of H beam. there is a protecting cover lining on the internal wall of the box. which is replace. the dust-removing system adopts the internationally advanced drum-type device , characterized by high efficient , low running resistance, small volume and light weight .the dust emission meets the relevant requirements of the country regarding environmental protection.

Provide goods bound and compose parts

Impeller blasting: include clean room noumenon, portrait screw conveyer , eight Q034abrasive impeller, abrasion proof scale board ,

Ball track system :include front and back ball track 26 meters, electromotor reducer, steel sheet piling circulatory system: include landscape orientation screw conveyer, bucket elevator, segregator , storage box , offer steel sheet piling.

Clean steel sheet piling setting: include conduit of dust removal, accommodate air valve, pulse filtering cartridge dust catcher and centrifugal blower.

Electric control system: include electric control cabinet , inward alternating current converter , junction box and distribution box without protectors .

Inverter : Siemens Contactor: Siemens Electrical system: Siemens

Technique document (send out to clientele after bargain go into effect )

a, Complete machine operation instruction(include electric

schematic diagram)

b, Transducer operation instruction , impeller blasting machine instruction

c. Commercial invoice

d. Equipment complete machine certificate of approval

e. Technique document